Welcome to the Motor Technology SHOP
We have 38 years experience in the motion control industry and supply a range of motion, flow and sensing products. Please browse our shop we have new products coming in daily and also have a range of legacy products.
Products that require an altered spec may be available please send us a quick enquiry.
Stall Torque (Mo) – 0.16 Nm
Rated Torque (Mn) (c3) – 0.12 Nm
Stall Current 325V – 0.44 A
Rated Current 325V – 0.33 A
Inertia – 0.05
A – 30
B – 46
D – 6
E – 20
H – 40
K – 130
P – 54
LSH-074-2-30-320/T1,P,S4 Lust / LTI servomotor
with resolver and 14mm shaft with keyway
To meet the demands of laboratory, pilot plant and production environments, we offer a range of Pump Control Stations that can be configured to customer needs.
In addition to the stand-alone pump heads and Fuji-Techno’s own portable units, we are able to offer a wide range of solutions for laboratory and factory based applications. The PDA comprises a HY series pump, mounted on a base plate with the driving elements including a gearbox, servo motor and coupling. The servo drive is typically supplied loose for integration into the local control panel.
The PDA can be supplied with pre-confectioned cable sets and the software commissioning tools for the servo drive.
The new portable unit has been developed to provide a user friendly, cost effective, lab and possible pilot plant scale solution for high corrosive media delivery to the highest performance levels.
The P501-M08 portable unit comprises a separate user control box with integrated HMI and a remote connection to the motor driven pump housing.
This allows the user to place the pump to be inside a fume hood or other container. Via the large user friendly touch-screen panel the operator can input volumetric efficiencies, making it easy to calibrate the pump to any required flow ratio.
To facilitate further integration of the P501-M08 portable unit into lab and production cells, a PC option is available for the simultaneous control of up 5 units and the operator terminal can be specified with inputs for external temperature and pressure sensors.
The HYM series super metering pumps (SMP) offer a solution for accurate pumping and dosing applications for laboratory trials, small batch production and specialist requirements.
The HYM-03 SMP provides the following flow rate
HYM-03, plunger diameter 3mm, maximum flow rate 15.3ml/min
Discharge pressure for the HYM series is up to 98Bar as standard. Up to 250Bar on the HYM-03 is possible as a cost option.
There are various liquid head types available for different applications including metallic heads in Stainless Steel (SUS316), Hastelloy and Titanium, as well as non-metalic heads in PTFE (Teflon) and PEEK.
This GW243 angled connector 7-way is typically used with
Gel 243 Minicoders made by Lenord + Bauer.
This MA262 measuring arm, made by Lenord + Bauer, is designed for use with the Lenord + Bauer
GEL 260, GEL261, GEL 262 and GEL 269 encoders.
This Gel 293-VN-10000-L000 encoder is made by Lenord + Bauer and is a
10,000 ppr, two signal channel encoder with zero marker.
The encoders contain a contact-less magnetic sensor system and a precision toothed wheel. They have proven themselves in the widest variety of applications the world over, even under the most rugged industrial conditions. And of course, the encoders offer superlative reliability coupled with a long service life
Low life cycle costs for the vehicle operator due to high reliability
Place-saving sensor in a compact design
MiniCODERs are provided for contactless measurement of
rotational movements primarily in machines, gears, motors
or high speed spindles.
MiniCODERs and precision target wheels
This mounting block brings the sensing head of certain Lenord + Bauer Gel 2443 and Gel 2444 Minicoders
to the same height as the Siemens SIZAG units, which have been discontinued.
This K1.1-L-R60WKSMB motherboard is suitable for the whole of the Kollmorgen Seidel 60WKS range of drives.
This item is used and fully functional.
The Y163 is a 4 phase Stepper motor with 5.0 rated voltage Made by Astrosyn
Other similar products available.
The MC464 supports up to 64 axes of motion with 64 bit integer position registers for ultra precise axis resolution.
Controller is supplied with 2 axis EtherCAT expansion module.
56WK-P150/80-B Power Supply made by Seidel is unused and is fully functional.
56WK-P240/80-B Power Supply made by Seidel
This Product is used but has been tested and is fully functional.
Sale of 1 batch of 7x Slightly used
Telemecanique Control Relays
Type CAD 32 BD
24V DC
Price includes VAT @ 20%
Please contact us for further details.
This 54K-P150/80-B Power Supply made by Seidel
Specification:
3x113V // 12.8kVA max. // 80A
This SPL 120 gearbox is a low backlash gearbox with 7:1 ratio made by Eisele.
This SM 86.2.18.M6 stepper motor 2.5Nm
made by Zebotronics in Germany.
This SM56 M-2000-J brushless servomotor is a 6 pole, trapezoidally wound motor
made by Kollmorgen Seidel and is fitted with Hall & Tacho feedback unit and a shaft seal.
The motor has a 172V winding making it suitable for use with servo drives providing up to 240Vdc bus voltage.
The 60WKS-CE240/6-PB is directly compatible with the 60WKS-M240/6-PB.
The 01 ramp option card is also not included, but may be available on request
STAR-matic linear actuator
Typ: 1460-206-07
ID-Nr: 9865/x
Datum: 12.10.1995
The motors fitted are 6SM37M 6000. We would sell the unit(s) without the motor.
This 900-1012-001 REV-A interface board is made by nuLogic Inc
and comes with 3M ribbon cable part number 3490-4.
This STE01-A21 card was presumably made for use on Schindler + Wagner ( SCHIWA ) meat slicing machines.
This SC14.1021 is a brushed DC servomotor made by Sangalli Servomotori and is fitted with a tacho.
SAC-E01A2 E-Series AC brushless servodrive made by ORMEC
These Sercos cards are suitable for firmware versions 4.94 and above.
Servostar 603 digital, high-performance servo amplifier
for controlling brushless synchronous servo motors with integrated resolvers.
Servostar 601 digital, high-performance servo amplifier
for controlling brushless synchronous servo motors with integrated resolvers.
This SKPD 24/7 top hat rail-mounted drive card holder
Details from Typeplate:
Westamp Inc.
Model No: SL30-13FH
Serial number: 9902033W24
This SM100 K-3000-G-J brushless servomotor
is a 6 pole, trapezoidally wound motor made by Kollmorgen Seidel
This ST3.6.1 Pre-Select Counter for Zebotronics stepper drives
is made by Zebotronics in Germany.
RPSC 370W 7 Ohm wirewound resistor new
This REG 100 gearbox is a low backlash gearbox
with 27:1 ratio made by Eisele in Germany.
This R03SMB motherboard suitable for all of the 03S range of drives is made by Seidel
and is unused and fully functional.
P184 – 4 Axis DAC Module complete with P445 – Euro205x DB Mounting Kit
made by Trio Motion Control.
ORN-SW-AM/0 ServoWire control card made by ORMEC v1.0.2
used with the ORION Motion Controller
This MAC-E002A2:101 brushless servo motor is a 6 pole,
sinusoidally wound motor made by ORMEC and is fitted with an encoder.
This Ecoflex also know as BKL/003 bellows coupling is suitable for low torque applications up to 3NM.
The outer diameter of the coupling is 25mm and overall length is 32.1mm.
60WKS-CE240/12-PB analogue, high-performance servo amplifier
for controlling brushless synchronous servo motors.
pcStep Stepper control card, made by nuLogic Inc. USA,
used with the ORMEC GN3 Motion Controllers
Option card for Gel 8300 & 8600 series Lenord+Bauer controllers.
This TFV 2.0-A11 output card was presumably made for use on Schindler + Wagner ( SCHIWA ) meat slicing machines.
Servostar 606 digital, high-performance servo amplifier
for controlling brushless synchronous servo motors with integrated resolvers.
Servostar 603 digital, high-performance servo amplifier
for controlling brushless synchronous servo motors with integrated resolvers.
This R03SMB motherboard suitable for all of the 03S range of drives is made by Seidel
and is unused and fully functional.
This MW92 mounting bracket, made by Lenord + Bauer, is designed for use with the Lenord + Bauer
GEL 260, GEL 261, GEL262 and GEL 269 encoders,
This EcoServ drive unit type: ND31-3204XS-001-000-00 is made by Lenord, Bauer & Co.
MU6V300/15V01 analogue, high-performance servo amplifier
made by Mattke for controlling brushless synchronous servo motors.
This MAC-G080A2/E2 brushless servo motor is a sinusoidally wound motor
made by ORMEC and is fitted with an encoder.
This product is used but tested and in working condition.
This Gel 152-F30-E04 encoder made by Lenord + Bauer is a programmable absolute multi-turn encoder.
It can be set to a maximum of 8,192 steps per revolution and a maximum of 4,096 revolutions.
This Gel 8080S11 Minicontroller made by Lenord + Bauer is a single axis electric cam controller.
This GS24/28 ROTEX metal coupling is made by KTR-Kupplungstechnik GmbH in Germany
and is suitable for applications up to 35NM.
The outer diameter of the coupling is 55mm and overall length is 77mm.
This GEL 152-F30-E04 absolute encoder is made by Lenord + Bauer
and is a programmable absolute multi-turn unit.
It can be programmed for a maximum of 8,192 steps per revolution
and a maximum of 4,096 revolutions.
Set up to your required specification is included in the cost.
The supply voltage is 11…26V DC and the shaft diameter is 12mm.
FZW 200x35S – 275W 4,7 Ohm wirewound resistor new
Part number: FZW 200x35S
made by FRIZLEN in Germany.
Linear Encoder with slimline housing
Gel 107-TN 01024 I000 5V encoder 1024ppr made by Lenord + Bauer in Germany.
This item is new and has been tested and is fully functional.
This Gel 8140 AABB000 Eco synchronisation position controller
made by Lenord + Bauer is a single axis controller. The input Voltage is 240V AC.
is a 2 axis controller for 2 incremental encoder inputs.
This Gel 8110AAA0001S Eco positioning controller made by Lenord + Bauer.
The input Voltage is 15-26VAC 18-30VDC.
EW942.PCB REV.A HS-A Control Card made by Indutron AG Switzerland.
This item has not been tested and is sold as seen.
It is in good, clean condition and is believed to be in good working condition.
ESM6045DV Power Transistor used.